Sony GP-X1EM Grip Extension - Manual (Page 383)

383
Displaying detailed file information
1
Open the File >Frame Memory >Frame Memory
menu (7151).
2
Press [File Edit].
The File Edit menu (7151.1) appears.
3
Select the device and folder to display.
For details about the method of operation, see
“Selecting the target folder/file for operations”
(page 382).
You can check information about the files that exist
within the currently selected folder.
The target device name and folder path for operations
are displayed on the left side of the detail display area,
and the file name and region selected in the list are
displayed on the right side.
The following information is displayed in the file list.
No: File number
Name: File name
Date/Time: Creation date and time of the file
File Operations
• Loading frame memory files is supported only when the
switcher signal format matches the file signal format.
• If saving to local drive or removable drive is canceled
while still in progress, images may not be able to be
reproduced correctly.
• Frame memory batch file operations are not supported.
Saving a file
You can save a file in frame memory storage to the local
drive or a removable drive.
This section describes selecting storage in the list on the
left as an example.
1
Open the File >Frame Memory >Frame Memory
menu (7151).
2
In the list on the left, select the file (storage) you want
to save, then select the destination folder (local drive
or removable drive) in the list on the right.
For details about the method of operation, see
“Selecting the target folder/file for operations”
(page 382).
3
Press [ t Save].
If a file with the same name already exists in the save
destination, it is overwritten.
Loading a file
You can load a file from the local drive or removable drive
to storage in frame memory.
This section describes selecting storage in the list on the
left as an example.
1
Open the File >Frame Memory >Frame Memory
menu (7151).
2
In the list on the right, select the file (local drive or
removable drive) you want to load, then select the
destination folder (storage) in the list on the left.
For details about the method of operation, see
“Selecting the target folder/file for operations”
(page 382).
A file cannot be loaded into a locked folder.
3
Press [ T Load].
Copying a file
You can copy a frame memory file on the local drive or
removable drive.
This section describes selecting the copy source in the list
on the left as an example.
1
Open the File >Frame Memory >Frame Memory
menu (7151).
2
In the list on the left, select the file (local drive or
removable drive) you want to copy, then select the
Notes
File list
Detail display area
Note