Sony GP-X1EM Grip Extension - Manual (Page 325)

325
Recalling and Executing a
Master Timeline
For details about recalling a master timeline in the
numeric keypad control block, see “Recalling a Register
(Numeric Keypad Control Block)” (page 307).
Recalling and Executing a Master
Timeline (Flexi Pad Control Block)
Pressing the [MASTR EFF] button in the Flexi Pad control
block switches the memory recall section to effect
operation mode for recalling and executing master
timelines. The region set when the master timeline was
saved is recalled.
Flexi Pad control block
1
In the Flexi Pad control block, press the [MASTR
EFF] button.
This switches the memory recall section to effect
operation mode.
The bank recalled last and register number are
displayed on the top right button in the memory recall
section.
2
Select the target bank for operation using the bank
selection buttons.
Select from bank 0 to 9 (register number 1 to 99) for
the effect.
For details about bank selection, see “Bank and
register selection in the Flexi Pad control block”
(page 333).
3
Press the button for the register to be recalled.
The selected button lights orange, and this recalls the
master timeline. The selected bank and register
number are displayed on the top right button in the
memory recall section.
4
Execute the effect.
Pressing the [REWIND] button in the memory recall
section moves to the first keyframe of the effect.
Pressing the [RUN] button executes the effect.
If a pause is set in the effect, the display of the [RUN]
button will switch to [PAUSE] at the pause point.
When you press the [PAUSE] button, the display
returns to [RUN] and effect execution resumes.
MASTR EFF button
Memory recall section
Bank selection buttons