Dell POWEREDGE M1000E - Manual (Page 166)

144 Fabric OS Message Reference
53-1002749-01
AUTH-1001
5
AUTH Messages
AUTH-1001
Message <Operation type> has been successfully completed.
Message Type LOG
Severity INFO
Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret command. The
values for Operation type can be "set" or "remove".
Recommended
Action
No action is required.
AUTH-1002
Message <Operation type> has failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified action has failed to update the secret database using the secAuthSecret
command. The values for Operation type can be "set" or "remove".
Recommended
Action
Execute the secAuthSecret command again.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1003
Message <data type> type has been successfully set to <setting value>.
Message Type LOG
Severity INFO
Probable Cause Indicates that an authentication configuration value was set to a specified value. The data type is
authentication type, DH group type, hash type, or policy type.
Recommended
Action
No action is required.