Bksw messages, Bksw-1003 – Dell POWEREDGE M1000E User Manual
Page 184
162
Fabric OS Message Reference
53-1002749-01
BKSW-1003
5
BKSW Messages
BKSW-1003
Message
kSWD: <Warning message>.
Message Type
FFDC | LOG
Severity
WARNING
Probable Cause
Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. This message is used to convey
information regarding the state of the system. The switch will reboot (on single-CP switches) or fail over
(on dual-CP switches).
The Warning message variable will be one of the following:
•
Detected unexpected termination of:
daemon name
- One of the critical daemons ended
unexpectedly.
•
daemon name
failed to refresh SWD*** Sending SIGABRT to PID
process id number
- One of the
critical daemons is found to be nonresponsive; sending signal abort (SIGABRT).
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.