Dell POWEREDGE M1000E - Manual (Page 434)

412 Fabric OS Message Reference
53-1002749-01
FICN-1115
5
FICN-1115
Message HostPrintEgr:CmdReject Sense Data Rcvd:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmds=0x<Last 4 commands
received from the channel for this device> SenseData:Bytes0-0xB=0x<Bytes 0-3 of
sense data from the device><Bytes 4-7 of sense data from the device><Bytes 8-0x0b
of sense data from the device>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an active Print emulation sequence received Command Reject Sense data from the device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1116
Message HostPrintEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmd=0x<Last 4
commands issued to this device from the channel> LastStatus=0x<Last 4 status
values sent to the channel from this device>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a Link Level Reject (LRJ) was received from a device indicating that the Control Unit has
lost the logical path to the Logical Partition (LPAR).
Recommended
Action
If this was an unexpected event; contact your vendor's customer support for assistance.
FICN-1117
Message HostPrintIng:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a job was canceled during Print write pipelining.
Recommended
Action
If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer
support for assistance.