Dell POWEREDGE M1000E - Manual (Page 201)

Fabric OS Message Reference 179
53-1002749-01
BL-1050
5
BL-1050
Message Incompatible Blade Processor FPGA version with FOS7.0 firmware in slot=<slot
number> on FX8-24. Contact support for upgrade instructions.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0
is incompatible on the FX8-24 blade.
Recommended
Action
Contact your switch service provider for upgrade instructions.
BL-1051
Message Incompatible Blade Processor FPGA version with FOS7.0 firmware on 7800. Contact
support for upgrade instructions.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0
is incompatible on the Brocade 7800 switch.
Recommended
Action
Contact your switch service provider for upgrade instructions.
BL-1052
Message Link Reset threshold exceeded in the internal port (slot <slot number>, port <port
number>). No core blade has been faulted because it has only one active core
blade.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the internal port in the core blade exceeded the link reset threshold level. Faulting the peer
edge blade because there is only one active core blade.
Recommended
Action
Replace the core blade.