Dell POWEREDGE M1000E - Manual (Page 435)

Fabric OS Message Reference 413
53-1002749-01
FICN-1118
5
FICN-1118
Message HostPrintIng::FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device> LastCmds=0x<the last 4 commands received from the channel
for this device> LastStatus=0x<the last 4 status values presented to the channel
for this device>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1119
Message HostPrintIng:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1120
Message HostPrintIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during FICON path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.