Dell POWEREDGE M1000E - Manual (Page 40)

18 Fabric OS Message Reference
53-1002749-01
Displaying system message logs and attributes
1
Displaying RASLog messages
To display the system message log on a switch with no page breaks, perform the following steps.
You can display the messages in reverse order using the reverse option. To display message logs in
all switches (logical switches), use the all option.
1. Log in to the switch as admin.
2. Enter the errDump command at the command line.
switch:admin> errdump
Version: v7.1.0
2000/12/17-05:54:30, [HAM-1004], 1, CHASSIS, INFO, switch, Processor rebooted
- Reset
2000/12/17-05:55:04, [ZONE-1034], 2, FID 128, INFO, switch, A new zone
database file is created.
2000/12/17-05:55:04, [FCR-1069], 3, FID 128, INFO, switch, The FC Routing
service is enabled.
2000/12/17-05:55:04, [FCR-1068], 4, FID 128, INFO, switch, The FC Routing
service is disabled.
2000/12/17-05:55:11, [EM-1034], 5, CHASSIS, ERROR, switch, PS 2 set to faulty,
rc=2000e.
[...]
Displaying RASLog messages one message at a time
To display the system message log one message at a time, perform the following steps.
1. Log in to the switch as admin.
2. Enter the errShow command at the command line.
switch:admin> errshow
Version: v7.1.0
2011/11/11-05:54:30, [HAM-1004], 1, CHASSIS, INFO, switch, Processor rebooted
- Reset
Type <CR> to continue, Q<CR> to stop:
2011/11/11-05:55:04, [ZONE-1034], 2, FID 128, INFO, switch, A new zone
database file is created.
Type <CR> to continue, Q<CR> to stop:
2011/11/11-05:55:04, [FCR-1069], 3, FID 128, INFO, switch, The FC Routing
service is enabled.
Type <CR> to continue, Q<CR> to stop:
[...]