Dell POWEREDGE M1000E - Manual (Page 853)

Fabric OS Message Reference 831
53-1002749-01
SULB-1009
5
"Out of memory." 0x14
"Failed to download RPM package." 0x15
"Unable to create firmware version file." 0x16
"Unexpected system error." 0x17
"Error in getting lock device for firmware download." 0x18
"Error in releasing lock device for firmware download." 0x19
"Firmware commit failed." 0x1a
"Firmware directory structure is not compatible. Check whether the firmware is
supported on this platform." 0x1b
"Failed to load the Linux kernel image." 0x1c
"OSLoader is inconsistent." 0x1d
"New image has not been committed. Run the firmwareCommit or
firmwareRestore command and then run the firmwareDownload command."
0x1e
"Firmware restore failed." 0x1f
"Both images are mounted to the same device." 0x20
"Unable to uninstall old packages." 0x21
"Firmware download is already in progress." 0x22
"Firmware download timed out." 0x23
"Out of disk space." 0x24
"Primary filesystem is inconsistent. Run the firmwareRestore command to restore
the original firmware, or contact your switch service provider for recovery."
0x25
"The post-install script failed." 0x26
"Unexpected reboot." 0x27
"Primary kernel partition is inconsistent. Contact your switch service provider for
recovery." 0x28
"The pre-install script failed." 0x29
"The platform option is not supported." 0x2a
"Failed to install RPM package." 0x2b
"Cannot downgrade directly to this version. Downgrade to an intermediate version
and then download the desired version." 0x2c
"Invalid RPM package. Reload firmware packages on the file server." 0x2e
"Cannot downgrade due to presence of blade type 17. Remove or power off these
blades before proceeding." 0x2f
"Cannot downgrade due to presence of blade type 24. Remove or power off these
blades before " 0x30
"Cannot downgrade due to presence of long-distance ports in LS mode. Remove
these settings before proceeding." 0x31
"Network is not reachable. Verify the IP address of the server is correct." 0x32
TABLE 8 Error messages and error codes (Continued)
Error message Error code