Dell POWEREDGE M1000E - Manual (Page 478)

456 Fabric OS Message Reference
53-1002749-01
FW-1131
5
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1131
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of zone changes has risen above the high boundary. Zone changes occur
when there is a change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1132
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of zone changes has changed from a value outside of the acceptable range to
a value within the acceptable range. Zone changes occur when there is a change to the effective zone
configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1133
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device
initializes with the fabric. The event is called fabric login (FLOGI).
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.