Dell POWEREDGE M1000E - Manual (Page 725)

Fabric OS Message Reference 703
53-1002749-01
SEC-1065
5
Recommended
Action
Run the secCertUtil show -fcapall command to verify that all PKI objects are valid. If PKI objects are not
valid, generate the PKI objects and install the certificate by following the field upgrade process.
SEC-1065
Message Invalid character in list.
Message Type LOG
Severity ERROR
Probable Cause Indicates the input list has an invalid character.
Recommended
Action
Enter valid input.
SEC-1069
Message
Security Database is corrupted.
Message Type LOG
Severity ERROR
Probable Cause Indicates the security database is corrupted for unknown reasons.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
SEC-1071
Message No new security policy data to apply.
Message Type LOG
Severity ERROR
Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended
Action
Verify that the security event was planned. First change some policy definitions, and then run the
secPolicyActivate command to activate the policies.