Dell POWEREDGE M1000E - Manual (Page 410)

388 Fabric OS Message Reference
53-1002749-01
FICN-1045
5
FICN-1045
Message HostTapeIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1046
Message HostTapeIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a Link Level Reject (LRJ) from a FICON channel indicates that the channel no longer has a
path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.
FICN-1047
Message
fcFicSetEmulation:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> FDCB Not Idle state=0x<Current
emulation state of the FICON device> prevState=0x<Previous emulation state of the
FICON device> set to state=0x<The new state to which the device is transitioning>.
Message Type LOG
Severity ERROR
Probable Cause Indicates there is an internal emulation error. This message should not be encountered.
Recommended
Action
This is an unexpected event; contact your vendor's customer support for assistance.