Dell POWEREDGE M1000E - Manual (Page 547)

Fabric OS Message Reference 525
53-1002749-01
FW-1447
5
FW-1447
Message Switch status change contributing factor Core Blade: <Number Bad> Core blade
failures (<Switch State>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of core blade
failures is greater than or equal to the policy set by the switchStatusPolicySet command.
Recommended
Action
Replace the faulty core blade.
FW-1448
Message Switch status change contributing factor Error ports: <Number of Error ports>
Error out of <Total number of ports> ports:config(<Percentage configured>
percent,<Actual threshold limit>). (Port(s) <port list>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty ports is
greater than or equal to the policy set by the switchStatusPolicySet command. A port is faulted
because of port segmentation or port disable.
Recommended
Action
Execute the switchShow command to know the reason for port segmentation and port disable. Take the
necessary action to bring the port up.
FW-1500
Message Mail overflow - Alerts being discarded.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the mail alert overflow condition has occurred.
Recommended
Action
Resolve or disable the mail alert using the fwMailCfg command.