Dell POWEREDGE M1000E - Manual (Page 486)

464 Fabric OS Message Reference
53-1002749-01
FW-1173
5
FW-1173
Message <Port Name> <Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of protocol errors that the port experiences has fallen below the low boundary.
Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to
hardware problems. A low number of protocol errors means that the switch is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1174
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the number of protocol errors that the port experiences has risen above the high boundary.
Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to
hardware problems.
Recommended
Action
Check both ends of your connection. Verify that your cable and small form-factor pluggables (SFPs) are
not faulty.
FW-1175
Message <Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of protocol errors that the port experiences has changed from a value outside
of the acceptable range to a value within the acceptable range. Occasional protocol errors occur due to
software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.