Dell POWEREDGE M1000E - Manual (Page 484)

462 Fabric OS Message Reference
53-1002749-01
FW-1167
5
FW-1167
Message <Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of synchronization losses that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors
frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create
synchronization losses.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1168
Message
<Port Name> <Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of signal losses that the port experiences has changed. Loss of signal
generally indicates a physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs)
are not faulty.
FW-1169
Message <Port Name> <Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of signal losses that the port experiences has fallen below the low boundary.
Loss of signal generally indicates a physical problem. A low number of signal loss errors means that the
switch is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.