Dell POWEREDGE M1000E - Manual (Page 233)

Fabric OS Message Reference 211
53-1002749-01
CDR-1014
5
CDR-1014
Message Link Reset on Internal Port S<slot number>,P<port number>(<blade port number>)
vc_no=<vc number> crd(s)lost=<Credit(s) lost>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that one or more credits were lost and the link is reset.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
CDR-1015
Message Port re-initialized due to Link Reset failure on internal Port S<slot
number>,P<port number>(<blade port number>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that specified port got re-initialized due to link reset failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
CDR-1016
Message
Port is faulted due to port re-initialization failure on internal Port S<slot
number>,P<port number>(<blade port number>) with reason <port fault reason>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified port is faulted due to port re-initialization failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.