Dell POWEREDGE M1000E - Manual (Page 828)

806 Fabric OS Message Reference
53-1002749-01
SS-1003
5
SS-1003
Message supportSave's operation to USB storage device aborted.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a USB operation error occurred during execution of the supportSave command. Complete
error information cannot always be displayed in this message because of possible errors in
subcommands being executed by the supportSave command.
Recommended
Action
Execute the usbstorage command to check the USB storage device settings. After the USB problem is
corrected, execute the supportSave command again.
SS-1004
Message One or more modules timed out during supportsave. Retry supportsave with -t option
to collect all logs.
Message Type LOG
Severity WARNING
Probable Cause Indicates a timeout in modules during the execution of the supportSave command.
Recommended
Action
Execute the supportSave -t [2-5] command to collect all logs.
SS-1005
Message supportsave failed for the slot <Slot Number>. Reason: No IP connection.
Message Type LOG
Severity WARNING
Probable Cause Indicates that there is no IP connection between the active control processor (CP) and the blade in the
specified slot.
Recommended
Action
Check for the IP connection between the active CP and the blade in the specified slot. After the IP
connection is established, execute the supportSave command again.