Dell POWEREDGE M1000E - Manual (Page 318)

296 Fabric OS Message Reference
53-1002749-01
EM-2003
5
EM-2003
Message <Slot Id or Switch for pizza boxes> has failed the POST tests. FRU is being
faulted.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a field-replaceable unit (FRU) has failed the Power-On Self-Test (POST). Refer to the
/tmp/post[1/2].slot#.log file for more information on the faults. To view this log file, you must be logged in
at the root level. The ID will be Switch for non-bladed systems.
Recommended
Action
On bladed systems, reseat the specified FRU.
On non-bladed switches, restart or power cycle the switch.
If the problem persists, perform the following actions:
• Execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then
power cycle the blade by using the slotPowerOff and slotPowerOn commands or have the
blade's ejector switch cycled to run POST and verify that the blade does not have any hardware
problems.
• On bladed systems, replace the specified FRU; otherwise, replace the switch.