Dell POWEREDGE M1000E - Manual (Page 557)

Fabric OS Message Reference 535
53-1002749-01
FW-1535
5
FW-1535
Message Fabric Watch has stopped portfencing feature for <Area String> loss area in <Port
Name> class since FOS6.3. Disabling port fencing feature for this.
Message Type LOG
Severity INFO
Probable Cause Indicates that Port Fencing is configured for link loss and synchronization loss in previous versions, but
upgrading to a new version resets the bit because Port Fencing is not supported.
Recommended
Action
No action is required. You are informed that the Port Fencing bit is reset.
FW-2000
Message FW Monitoring is disabled since MAPS is enabled.
Message Type LOG
Severity INFO
Probable Cause Indicates that Fabric Watch is not monitoring the switch because MAPS is enabled.
Recommended
Action
Verify that the event was planned.
FW-3001
Message
Event: <Event Name>, Status: success, Info:<Event Related Info>.
Message Type AUDIT
Class CFG
Severity INFO
Probable Cause Indicates that Port Fencing was enabled or disabled successfully.
Recommended
Action
No action is required.