Dell POWEREDGE M1000E - Manual (Page 654)

632 Fabric OS Message Reference
53-1002749-01
NS-1010
5
NS-1010
Message CSCTL mode enabled on port <csctlport> QoS zoning will be ignored for devices on
this port.
Message Type LOG
Severity WARNING
Probable Cause Indicates that class-specific control (CS_CTL) mode has been enabled on the specified port that has
devices as members of a quality of service (QoS) zone.
Recommended
Action
Remove the CS_CTL configured devices from the QoS zone.
NS-1011
Message NS has detected a failover flag disabled TI zone in a base switch <Domain Id> in
fabric ID <Fabric ID>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a failover-disabled traffic isolation (TI) zone has been detected in a base switch fabric.
Recommended
Action
Enable the failover flag or remove the TI zone with the disabled failover flag because the routing may not
be set up correctly.
NS-1012
Message Detected duplicate WWPN [<WWPN>] - devices removed with PID 0x<existing device
PID> and 0x<new device PID>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the devices with the same World Wide Port Name (WWPN) have been removed from the
Name Server database.
Recommended
Action
Verify the device reported with duplicate WWPN.