Dell POWEREDGE M1000E - Manual (Page 355)

Fabric OS Message Reference 333
53-1002749-01
FCOE-1023
5
FCOE-1023
Message <portindex>, Too many logins on FCoE controller, max allowed =
<MAX_DEVS_PER_CTLR>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the controller has reached its maximum allowed FCoE login limit.
Recommended
Action
Log out some of the logged-in devices using the fcoe --resetlogin command and then log in a new
device. You can view the list of logged-in devices using the fcoe --loginshow command.
FCOE-1024
Message FDISC received from E_node without prior FLOGI.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a FDISC frame is received from the end node that has not logged in. The end node must
send a fabric login (FLOGI) before it can send an FDISC.
Recommended
Action
It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.
FCOE-1025
Message
FCoE logout received on FIP VN port.
Message Type LOG
Severity WARNING
Probable Cause Indicates pre-FIP logout for a device that has logged in using the FCoE Initialization Protocol (FIP).
Recommended
Action
It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.