Dell POWEREDGE M1000E - Manual (Page 812)

790 Fabric OS Message Reference
53-1002749-01
SPM-1001
5
SPM Messages
SPM-1001
Message Init fails: <Reason>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the security processor management (SPM) failed to initialize.
Recommended
Action
Check the system resources and restart the switch.
SPM-1002
Message
Generic SPM Warning: <Reason>.
Message Type LOG
Severity WARNING
Probable Cause Indicates an security processor management (SPM) warning based on the reason displayed.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
SPM-1003
Message Set New Group Cfg SC Enable <SC_Enable> KV Type <KV_Type>.
Message Type LOG
Severity INFO
Probable Cause Indicates a new group has been configured.
Recommended
Action
No action is required.