Dell POWEREDGE M1000E - Manual (Page 624)

602 Fabric OS Message Reference
53-1002749-01
LSDB-1001
5
LSDB Messages
LSDB-1001
Message Link State ID <link state ID> out of range.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified link state ID is out of the acceptable range. The valid link state ID is the same
as the valid domain ID, with a range from 1 through 239. The switch will discard the record because it is
not supported.
Recommended
Action
No action is required.
LSDB-1002
Message Local Link State Record reached max incarnation.
Message Type LOG
Severity INFO
Probable Cause Indicates that the local link state record (LSR) reached the maximum number of incarnations.
An "incarnation" is a progressive number that identifies the most recent version of the link state record
(LSR). The switch generates its local LSR when first enabled. The incarnation number will begin again at
0x80000001 after reaching 0x7FFFFFFF.
Recommended
Action
No action is required.
LSDB-1003
Message No database entry for local Link State Record, domain <local domain>.
Message Type FFDC | LOG
Severity CRITICAL
Probable Cause Indicates that there is no local link state record (LSR) entry in the link state database (LSDB). The switch
should always generate its own local entry when starting up.
An "incarnation" is a progressive number that identifies the most recent version of the LSR. The switch
generates its local LSR when first enabled. By disabling and enabling the switch, a new local LSR is
generated.