Ips messages, Ips-1001, Ips-1002 – Dell POWEREDGE M1000E User Manual

Page 597: Ips-1003

Advertising
background image

Fabric OS Message Reference

575

53-1002749-01

IPS-1001

5

IPS Messages

IPS-1001

Message

<message> FTR_AFA/FTR_AE License Not Installed (<error>).

Message Type

LOG

Severity

WARNING

Probable Cause

Indicates that either Advanced FICON Acceleration (FTR_AFA) or Advanced Extension (FTR_AE)
license is not installed or assigned to the slot.

Recommended

Action

Run the licenseShow command to verify the slot-based licenses are installed on the switch. Contact
your switch supplier for an appropriate slot-based license. Run the licenseAdd and licenseSlotCfg
commands to add the license to your switch and activate it.

IPS-1002

Message

Failed to initialize <module> rc = <error>.

Message Type

LOG

Severity

ERROR

Probable Cause

Indicates that the initialization of a module within the IPS daemon failed.

Recommended

Action

Download a new firmware version using the firmwareDownload command.

IPS-1003

Message

<function name>: Failed to allocate memory while performing <message>.

Message Type

LOG

Severity

WARNING

Probable Cause

Indicates that memory resources are low. This may be a transient problem.

Recommended

Action

Check the memory usage on the switch using the memShow command.

If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.

Advertising