Dell POWEREDGE M1000E - Manual (Page 35)

Fabric OS Message Reference 13
53-1002749-01
Commands for displaying and configuring the system message logs
1
IF-MIB: YES
BD-MIB: YES
SW-TRAP: YES
swFault: YES
swSensorScn: YES
swFCPortScn: YES
swEventTrap: YES
DesiredSeverity:Informational
swFabricWatchTrap: YES
DesiredSeverity:Critical
swTrackChangesTrap: YES
swIPv6ChangeTrap: YES
swPmgrEventTrap: YES
swFabricReconfigTrap: YES
[...]
Commands for displaying and configuring the system message logs
Table 3 describes commands that you can use to view or configure the system message logs. Most
commands require the admin access level. For detailed information on required access levels and
commands, refer to the Fabric OS Command Reference.
TABLE 3 Commands for viewing or configuring the system parameters and message logs
Command Description
auditCfg Configures the audit message log.
auditDump Displays or clears the audit log.
errClear Clears all error log messages for all switch instances on this control processor (CP).
errDelimiterSet Sets the error log start and end delimiter for messages pushed to the console.
errDump Displays the entire error log, without page breaks. Use the -r option to show the
messages in reverse order, from newest to oldest.
errFilterSet Sets an error severity filter for the system console.
errModuleShow Displays all the defined error log modules.
errShow Displays the entire error log, with page breaks. Use the -r option to show the messages
in reverse order, from newest to oldest.
pdShow Displays the contents of the panic dump and core dump files.
portErrShow Displays the port error summary.
portLogClear Clears the port log. If the port log is disabled, this command enables it.
portLogDisable Disables the port log facility.
portLogDump Displays the port log, without page breaks.
portLogDumpPort Displays the port log of the specified port, without page breaks.
portLogEnable Enables the port log facility.
portLogEventShow Displays which port log events are currently being reported.
portLoginShow Displays port logins.
portLogPdisc Sets or clears the debug pdisc_flag.
portLogReset Enables the port log facility.