Dell POWEREDGE M1000E - Manual (Page 399)

Fabric OS Message Reference 377
53-1002749-01
FICN-1012
5
FICN-1012
Message DevDiskIng:Device level exception found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID that
was reported in the Device Level Exception Frame>.
Message Type LOG
Severity ERROR
Probable Cause Indicates a Device Level Exception frame received from the FICON direct attached storage device
(DASD) Control Unit.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1013
Message DevDiskIng:Status=0x<Status that was received from the DASD device in an odd
state> received in odd state=0x<The current emulation state> from
Path=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR CUADDR
DeviceAddr> sent LBY.
Message Type LOG
Severity INFO
Probable Cause Indicates that when the device sent the status in an incorrect state, the emulation processing rejected the
status with an LBY frame.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1014
Message DevEgr:Device level exception flag found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID used
to deliver the non-AS Device Level Exception>.
Message Type LOG
Severity INFO
Probable Cause Indicates a frame was received that indicated a device level exception.
Recommended
Action
If there was an I/O failure associated with this event, contact your vendor's customer support for
assistance.