Dell POWEREDGE M1000E - Manual (Page 236)

214 Fabric OS Message Reference
53-1002749-01
CHS-1002
5
CHS Messages
CHS-1002
Message ki_gd_register_action failed with rc = <return val>.
Message Type LOG | FFDC
Severity ERROR
Probable Cause Indicates an internal error.
Recommended
Action
To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To
recover a non-bladed system, execute the fastBoot command on the switch.
CHS-1003
Message
Slot ENABLED but Not Ready during recovery, disabling slot = <slot number> rval =
<return value>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the slot state has been detected as inconsistent during failover or recovery.
Recommended
Action
For a bladed switch, execute the slotPowerOff and slotPowerOn commands to power cycle the blade.
For a non-bladed switch, restart or power cycle the switch.
CHS-1004
Message Blade attach failed during recovery, disabling slot = <slot number>, rval =
<return value>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified blade has failed during failover or recovery.
Recommended
Action
For a bladed switch, execute the slotPowerOff and slotPowerOn commands to power cycle the blade.
For a non-bladed switch, restart or power cycle the switch.