Dell POWEREDGE M1000E - Manual (Page 339)

Fabric OS Message Reference 317
53-1002749-01
FABR-1045
5
FABR-1045
Message Detected Base Switch conflict with remote (not neighbor) switch <Switchname>
(domain <Domain ID>), BS <Base Switch Mode>. No local E_Ports disabled.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. But no ports
are disabled because the remote switch is not an adjacent to the local switch.
Recommended
Action
Make sure that all the switches in the fabric have the same Base Switch attribute or disable VF mode for
the conflicting switch using the fosConfig command.
FABR-1046
Message Detected Base Switch conflict with neighbor switch <Switchname> (domain <Domain
ID>), BS <Base Switch Mode>. E_Ports (<Number of E_Ports disabled>) connected to
the switch are disabled.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. All the E_Ports
directly connected to the conflicting switch are disabled.
Recommended
Action
Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the switch
firmware to a VF-capable firmware.
FABR-1047
Message Area unavailable to assign to the port. Persistently disabling port <Port that is
being disabled>.
Message Type LOG
Severity INFO
Probable Cause Indicates that there are no areas available to assign to the port during port creation.
Recommended
Action
Move some ports out of the default switch to make areas available.