Dell POWEREDGE M1000E - Manual (Page 748)

726 Fabric OS Message Reference
53-1002749-01
SEC-1160
5
SEC-1160
Message Duplicate port <port ID> in port list (<port list>).
Message Type LOG
Severity INFO
Probable Cause Indicates a duplicate port member exists in the specified port list.
Recommended
Action
Verify that there is no duplicate port member in the port list.
SEC-1163
Message System is already in secure mode. Lockdown option cannot be applied.
Message Type LOG
Severity ERROR
Probable Cause Indicates the lockdown option was attempted while the fabric is in secure mode.
Recommended
Action
Do not use the lockdown option with the secModeEnable command when a switch is already in secure
mode.
SEC-1164
Message
Lockdown option cannot be applied on a non-FCS switch.
Message Type LOG
Severity ERROR
Probable Cause Indicates the attempt to enable security is made on a switch that is not present in the fabric configuration
server (FCS) list.
Recommended
Action
Add the switch to the FCS policy list when using the lockdown option to enable security.
SEC-1165
Message Low memory, failed to enable security on all switches.
Message Type LOG
Severity ERROR
Probable Cause Indicates the system is low on memory.