Dell POWEREDGE M1000E - Manual (Page 329)

Fabric OS Message Reference 307
53-1002749-01
FABR-1009
5
FABR-1009
Message <error description>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that errors were reported during the exchange fabric parameter state; cannot allocate domain
list due to a faulty exchange fabric parameter (EFP) type. This message is rare and usually indicates a
problem with the Fabric OS.
Recommended
Action
The fabric daemon will discard the EFP. The system will recover through the EFP retrial process.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers;
then run the supportSave command and contact your switch service provider.
FABR-1010
Message <error description>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that errors occurred while cleaning up the request domain ID (RDI). The error description
provides further details. This message is rare and usually indicates a problem with the Fabric OS.
Recommended
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers;
then run the supportSave command and contact your switch service provider.
FABR-1011
Message
<error description>.
Message Type LOG | FFDC
Severity ERROR
Probable Cause Indicates that the Fabric OS is unable to inform the Fabric OS State Synchronization Management
module (FSSME) that the fabric is stable or unstable. This message is rare and usually indicates a
problem with the Fabric OS.
Recommended
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers;
then run the supportSave command and contact your switch service provider.