Dell POWEREDGE M1000E - Manual (Page 494)

472 Fabric OS Message Reference
53-1002749-01
FW-1197
5
FW-1197
Message <Port Name> <Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of link resets that the port experiences has fallen below the low boundary level.
Link resets occur due to link timeout errors that indicate no frame activity. A low number of link resets
means that the switch is functioning normally.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.
FW-1198
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the number of link resets that the port experiences has increased above the high boundary
level. Link resets occur due to link timeout errors that indicate no frame activity. Both physical and
hardware problems can cause link resets to increase.
Recommended
Action
Check both ends of your cable connection. Verify if the cable and small form-factor pluggables (SFPs)
are faulty.
FW-1199
Message <Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of link resets that the port experiences has changed from a value beyond the
acceptable range to a value within the acceptable range. Link resets occur due to link timeout errors that
indicate no frame activity. Both physical and hardware problems can cause link resets to increase.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.