Dell POWEREDGE M1000E - Manual (Page 182)

160 Fabric OS Message Reference
53-1002749-01
AUTH-3004
5
AUTH-3004
Message Event: <Event Name>, Status: failed, Info: Neighboring switch has a conflicting
authentication policy; Port <Port Number> disabled.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates that the specified E_Port was disabled because the neighboring switch rejected the
authentication negotiation, and the local switch has a strict switch authentication policy.
Recommended
Action
Correct the switch policy configuration on either of the switches using the authUtil command, and then
enable the port using the portEnable command.
AUTH-3005
Message Event: <Event Name>, Status: failed, Info: Rejecting authentication request on
port <Port Number> because switch policy is turned OFF.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates that the local switch has rejected the authentication request, because the switch policy is
turned off. If the neighboring switch has a strict (ON) switch policy, the port will be disabled due to
conflicting configuration settings. Otherwise, the E_Port will form without authentication.
Recommended
Action
If the specified port is disabled, correct the switch policy configuration on either of the switches using the
authUtil command, and then enable the port on the neighboring switch using the portEnable command.
If the E_Port formed, no action is required.
AUTH-3006
Message Event: <Event Name>, Status: failed, Info: Authentication failed on port <port
number> due to mismatch of DH-CHAP shared secrets.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates that a Diffie Hellman - Challenge Handshake Authentication Protocol (DH-CHAP)
authentication operation failed on the specified port due to mismatched response values between two
entities.
The error may indicate that an invalid entity tried to connect to the switch.