Dell POWEREDGE M1000E - Manual (Page 719)

Fabric OS Message Reference 697
53-1002749-01
SEC-1041
5
SEC-1041
Message Invalid port member <port member> in portlist (<port list>). <Reason>.
Message Type LOG
Severity ERROR
Probable Cause Indicates the port member is invalid for one of the following reasons:
• The value is not a number.
• The value is too long. Valid numbers must be between one and three characters long.
• The value cannot be parsed due to invalid characters.
Recommended
Action
Use valid syntax when entering port members.
SEC-1042
Message Invalid index/area member <port member> in portlist (<Port list>). Out of range
(<Minimum value> - <Maximum value>).
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified index or area member is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering index or area numbers.
SEC-1043
Message Invalid port range <Minimum> - <Maximum>.
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified port is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering port ranges.