Dell POWEREDGE M1000E - Manual (Page 436)

414 Fabric OS Message Reference
53-1002749-01
FICN-1121
5
FICN-1121
Message HostPrintIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type LOG
Severity WARNING
Probable Cause Indicates than a Link Level Reject (LRJ) received from a FICON channel indicates that the channel no
longer has a path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.
FICN-1122
Message DevPrintIng:UnusualStatus:WriteCancelSelr:Generating Final Ending Status
Path=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR CUADDR
DeviceAddr>.
Message Type LOG
Severity INFO
Probable Cause Indicates the FICON Print write pipeline sequence has received unit check status.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-2005
Message FICON VEPort <VE port number> Feature Change verified Xrc <1 or 0 - XRC Emulation
Enabled or Disabled> TapeWrt <1 or 0 - Tape Write Emulation Enabled or Disabled>
TapeRd <1 or 0 - FICON Tape Read Emulation Enabled or Disabled> TinTir <1 or 0 -
FICON TIN/TIR Emulation Enabled or Disabled> DvcAck <1 or 0 - FICON Device Level
Ack Emulation Enabled or Disabled> RdBlkId <1 or 0 - FICON Write Emulation Read
Block ID Emulation Enabled or Disabled>.
Message Type LOG
Severity INFO
Probable Cause Indicates the configuration was changed manually.
Recommended
Action
No action is required.