Dell POWEREDGE M1000E - Manual (Page 921)

Fabric OS Message Reference 899
53-1002749-01
ZONE-1039
5
ZONE-1039
Message Unable to read contents of <config file name>: error message <System Error
Message>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Fabric OS cannot read the zone configuration file. Typically, the zone configuration is
too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
ZONE-1040
Message Merged zone database exceeds limit.
Message Type LOG
Severity INFO
Probable Cause Indicates that the Fabric OS cannot read the merged zone configuration file. Typically, the zone
configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
ZONE-1041
Message Unstable link detected during merge at port (<Port number>).
Message Type LOG
Severity WARNING
Probable Cause Indicates a possible unstable link or faulty cable.
Recommended
Action
Verify that the small form-factor pluggable (SFP) transceiver and the cable at the specified port are not
faulty. Replace the SFP and the cable, if necessary.