Dell POWEREDGE M1000E - Manual (Page 356)

334 Fabric OS Message Reference
53-1002749-01
FCOE-1026
5
FCOE-1026
Message FDISC/FLOGI mismatch. FDISC addressed to different FCF than base FLOGI.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the base port has sent a fabric login (FLOGI) but the subsequent FDISC frames that were
received on the switch do not match the original FLOGI.
Recommended
Action
It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.
FCOE-1027
Message <message> : <mac1>:<mac2>:<mac3>:<mac4>:<mac5>:<mac6>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Fibre Channel Forwarders (FCF) controller is not found for the DA. The end node may
be sending the FLOGI with a wrong DA MAC address.
Recommended
Action
Some parameters are not exchanged correctly between the switch and the end device. Reconfigure the
port.
FCOE-1028
Message <message> : <wwn1>:<wwn2>:<wwn3>:<wwn4>:<wwn5>:<wwn6>:<wwn7>:<wwn8>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the FCoE device with the specified World Wide Name (WWN) is not a member of the login
group.
Recommended
Action
Change the FCoE login group policy on the switch using the fcoelogingroup command so that the
device can log in.