Dell POWEREDGE M1000E - Manual (Page 423)

Fabric OS Message Reference 401
53-1002749-01
FICN-1082
5
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.
FICN-1082
Message EmulEls:CSWR_RSCN received on GEPort=<GEPortNumber> VEPort=<VEPortNumber>
Domain=0x<Domain> Port=0x<Port Host/Device Side>.
Message Type LOG
Severity WARNING
Probable Cause Indicates an attached port which had a FICON emulated path established has logged out from the
switch.
Recommended
Action
This may be an unexpected event; contact your vendor's customer support for assistance.
FICN-1083
Message EmulEls:SW_RSCN received on GEPort=<GEPortNumber> VEPort=<VEPortNumber>
Domain=0x<Domain> Port=0x<Port Host/Device Side>.
Message Type LOG
Severity WARNING
Probable Cause Indicates an attached port with the established FICON emulated path has logged out from the switch.
Recommended
Action
This may be an unexpected event; contact your vendor's customer support for assistance.
FICN-1084
Message fcFicInit: No DRAM2 memory available, FICON emulation is disabled.
Message Type LOG
Severity ERROR
Probable Cause Indicates a faulty DRAM2 was detected and access to its address range is prohibited.
Recommended
Action
This is an unexpected event; contact your vendor's customer support for assistance.