Dell POWEREDGE M1000E - Manual (Page 507)

Fabric OS Message Reference 485
53-1002749-01
FW-1302
5
FW-1302
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the number of Hypertext Transfer Protocol (HTTP) violations has risen above the high
boundary. HTTP violations indicate that a browser connection request has been received from an
unauthorized IP address. The HTTP_POLICY contains a list of IP addresses that are authorized to
establish browser connections to the switches in the fabric.
Recommended
Action
Execute the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
FW-1303
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of Hypertext Transfer Protocol (HTTP) violations has changed from a value
outside of the acceptable range to a value within the acceptable range. HTTP violations indicate that a
browser connection request has been received from an unauthorized IP address. The HTTP_POLICY
contains a list of IP addresses that are authorized to establish browser connections to the switches in the
fabric.
Recommended
Action
No action is required.
FW-1304
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of application programming interface (API) violations has changed. API
violations indicate that an API connection request has been received from an unauthorized IP address.
The Simple Network Management Protocol policy (SNMP_POLICY) contains a list of IP addresses that
are authorized to establish API connections to switches in the fabric.