Sec-3038, Sec-3039, Sec-3044 – Dell POWEREDGE M1000E User Manual

Page 787

Advertising
background image

Fabric OS Message Reference

765

53-1002749-01

SEC-3038

5

SEC-3038

Message

Event: ipfilter, Status: failed, Info: Failed to activate <IP Filter Policy>
ipfilter policy.

Message Type

AUDIT | LOG

Class

SECURITY

Severity

INFO

Probable Cause

Indicates the specified IP filter policy failed to activate.

Recommended

Action

Verify the security event was planned. If the event was planned, no action is required. If the security
event was not planned, take appropriate action as defined by your enterprise security policy.

SEC-3039

Message

Event:Security Violation , Status: failed, Info: Unauthorized host with IP address
<IP address of the violating host> tries to establish connection using <Protocol
Connection Type>.

Message Type

AUDIT | LOG

Class

SECURITY

Severity

INFO

Probable Cause

Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the
message.

Recommended

Action

Check for unauthorized access to the switch through the specified protocol connection.

SEC-3044

Message

The FIPS mode has been changed to <Fips Mode>.

Message Type

AUDIT

Class

SECURITY

Severity

INFO

Probable Cause

Indicates there was a change in the Federal Information Processing Standards (FIPS) mode.

Recommended

Action

Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.

Advertising