Dell POWEREDGE M1000E - Manual (Page 180)

158 Fabric OS Message Reference
53-1002749-01
AUTH-1046
5
Recommended
Action
Check the certificate availability using the secCertUtil show -fcapall command.
Install the certificate and reinitialize authentication using the portDisable and portEnable commands or
the switchDisable and switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1046
Message <Operation type> has been successfully completed.
Message Type AUDIT | LOG
Class SECURITY
Severity INFO
Probable Cause Indicates that the certificate database operation has been updated using the secAuthCertificate
command. The values for Operation type can be "set" or "remove".
Recommended
Action
No action is required.
AUTH-1047
Message
<Operation type> has failed.
Message Type AUDIT | LOG
Class SECURITY
Severity ERROR
Probable Cause Indicates that the specified action has failed to update the certificate database using the
secAuthCertificate command. The values for Operation type can be "set" or "remove".
Recommended
Action
Execute the secAuthCertificate command again.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.