Dell POWEREDGE M1000E - Manual (Page 475)

Fabric OS Message Reference 453
53-1002749-01
FW-1123
5
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1123
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of domain ID changes has risen above the high boundary. Domain ID changes
occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign
another domain ID to the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1124
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of domain ID changes has changed from a value outside of the acceptable
range to a value within the acceptable range. Domain ID changes occur when there is a conflict of
domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1125
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of segmentations has changed. Segmentation changes might occur due to the
following reasons:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.