Dell POWEREDGE M1000E - Manual (Page 669)

Fabric OS Message Reference 647
53-1002749-01
PDM-1019
5
PDM-1019
Message File path or trigger too long.
Message Type LOG
Severity WARNING
Probable Cause Indicates that one line of the pdm.conf file is too long.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1020
Message Long path name (<Path>/<File Name>), Skip.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified file path name is too long. The maximum character limit is 49 characters.
Recommended
Action
Use path names not exceeding 49 characters in length for the files to be replicated.
PDM-1021
Message Failed to download area port map.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a system call failed.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.