Dell POWEREDGE M1000E - Manual (Page 474)

452 Fabric OS Message Reference
53-1002749-01
FW-1120
5
FW-1120
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of fabric reconfigurations has changed from a value outside of the acceptable
range to a value within the acceptable range. The following occurrences can cause a fabric
reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1121
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of domain ID changes has changed. Domain ID changes occur when there is a
conflict of domain IDs in a single fabric and the principal switch must assign another domain ID to the
switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1122
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of domain ID changes has fallen below the low boundary. Domain ID changes
occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign
another domain ID to the switch. A low number of domain ID changes means that the fabric is functioning
normally.