Dell POWEREDGE M1000E - Manual (Page 405)

Fabric OS Message Reference 383
53-1002749-01
FICN-1030
5
FICN-1030
Message HostDiskIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1031
Message HostDiskIng:FICON System Reset received on Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR><CUADDR>**.
Message Type LOG
Severity WARNING
Probable Cause Indicates the FICON channel sent a System Reset to the disk control unit.
Recommended
Action
No action is required. The MVS system was either set to initial program load (IPL) or performing error
recovery.
FICN-1032
Message
HostDiskIng:XRC Read Channel Extender Capabilities detected on Path:
0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR CUADDR
DeviceAddr>.
Message Type LOG
Severity INFO
Probable Cause Indicates the eXtended Remote Copy (XRC) System Data mover was restarted to discover the
capabilities of the channel extension equipment.
Recommended
Action
No action is required. This is a part of the XRC initialization.