Dell POWEREDGE M1000E - Manual (Page 503)

Fabric OS Message Reference 481
53-1002749-01
FW-1250
5
FW-1250
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of end-to-end word frames that the switch transmits has risen above the high
boundary. Transmit performance messages appear due to the number of word frames that travel from
the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1251
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of end-to-end word frames that the switch transmits has changed from a value
outside of the acceptable range to a value within the acceptable range. Transmit performance messages
appear due to the number of word frames that travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1272
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of frame types or commands that the port receives has changed. The port has
received Small Computer System Interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI
Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.