Dell POWEREDGE M1000E - Manual (Page 523)

Fabric OS Message Reference 501
53-1002749-01
FW-1347
5
FW-1347
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of invalid timestamps has changed from a value outside of the acceptable
range to a value within the acceptable range. Invalid timestamp violations indicate a packet with an
invalid timestamp has been received from the primary fabric configuration server (FCS). When the
primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a
timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great,
it rejects the packet. This counter keeps track of packets rejected due to invalid timestamps.
Recommended
Action
No action is required.
FW-1348
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of invalid signatures has changed. Invalid signature violations indicate that a
packet with an invalid signature has been received from the primary fabric configuration server (FCS).
When the primary FCS downloads a new configuration to the other switches in the fabric, the packet is
signed using the private key of the primary FCS. The receiving switch must verify this signature with the
public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of
the number of packets received with invalid signatures.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.