Dell POWEREDGE M1000E - Manual (Page 695)

Fabric OS Message Reference 673
53-1002749-01
RCS-1004
5
RCS-1004
Message Application(<application name>) not registered.(<error string>).
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified application did not register with reliable commit service (RCS).
Recommended
Action
Run the haShow command to view the HA state.
Run the haDisable and haEnable commands.
Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS
v2.6, v3.1 and later, and v4.1 and later.
Run the firmwareDownload command to upgrade the firmware for any switches that do not support
RCS.
RCS-1005
Message Phase <RCS phase>, <Application Name> Application returned <Reject reason>,
0x<Reject code>.
Message Type LOG
Severity INFO
Probable Cause Indicates that a receiving switch is rejecting the specified reliable commit service (RCS) phase.
Recommended
Action
If the reject is in the acquire change authorization (ACA) phase, wait for several minutes and then retry
the operation from the sender switch.
If the reject is in the stage fabric configuration (SFC) phase, check if the application license exists for the
local domain and if the application data is compatible.
RCS-1006
Message State <RCS phase>, Application <Application Name> AD<Administrative Domain>, RCS
CM. Domain <Domain ID that sent the reject> returned 0x<Reject code>. App Response
Code <Application Response Code>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified domain rejected a reliable commit service (RCS) phase initiated by an
application on the local switch.
• If the reject phase is acquire change authorization (ACA), the remote domain may be busy and
could not process the new request.
• If the reject phase is stage fabric configuration (SFC), the data sent by the application may not
be compatible or the domain does not have the license to support that application.