Dell POWEREDGE M1000E - Manual (Page 115)

Fabric OS Message Reference 39
53-1001767-01
Chapter
4
AUTH System Messages
AUTH-1001
Message
<timestamp>, [AUTH-1001], <sequence-number>,, INFO, <system-name>, <Operation
type> has been successfully completed.
Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret
command. The values for Operation type can be “set” or “remove”.
Recommended
Action
No action is required.
Severity INFO
AUTH-1002
Message
<timestamp>, [AUTH-1002], <sequence-number>,, ERROR, <system-name>, <Operation
type> has failed.
Probable Cause Indicates that the specified action has failed to update the secret database using the
secAuthSecret command. The values for Operation type can be “set” or “remove”.
Recommended
Action
Retry the secAuthSecret command.
Run the supportFtp command (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
AUTH-1003
Message
<timestamp>, [AUTH-1003], <sequence-number>,, INFO, <system-name>, <data type>
type has been successfully set to <setting value>.
Probable Cause Indicates that an authentication configuration value was set to the specified value. The data type is
either authentication type, DH group type, or policy type.
Recommended
Action
No action is required.
Severity INFO