Fw-1379, Fw-1400, Fw-1401 – Dell POWEREDGE M1000E User Manual

Page 414

Advertising
background image

338

Fabric OS Message Reference

53-1001767-01

FW-1379

42

Severity

WARNING

FW-1379

Message

<timestamp>, [FW-1379], <sequence-number>,, INFO, <system-name>, <Label>, is

between high and low boundaries(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Probable Cause

Indicates that the number of illegal commands has changed from a value outside of the acceptable
range to a value within the acceptable range. This counter tracks how many times commands
allowed only on the primary fabric configuration server (FCS) switch have been executed on a
non-primary FCS switch. There are many commands that can be executed only on the primary FCS
switch as well as one security command that can be executed only on a backup FCS switch. The
counter increments every time someone issues one of these commands on a switch where it is not
allowed.

Recommended

Action

No action is required.

Severity

INFO

FW-1400

Message

<timestamp>, [FW-1400], <sequence-number>,, INFO, <system-name>, <Label>, value

has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.

Probable Cause

Indicates that the flash usage percentage has changed. Flash increases and decreases slightly
with normal operation of the switch. Excessive permanent increases can lead to future problems.

Recommended

Action

No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.

Severity

INFO

FW-1401

Message

<timestamp>, [FW-1401], <sequence-number>,, INFO, <system-name>, <Label>, is

below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>

<Unit>.

Probable Cause

Indicates that the flash usage percentage has fallen below the low boundary. Flash increases and
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to
future problems.

Recommended

Action

No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.

Severity

INFO

Advertising