Bksw system messages, Chapter 6, Bksw-1003 – Dell POWEREDGE M1000E User Manual
Page 133
Fabric OS Message Reference
57
53-1001767-01
Chapter
6
BKSW System Messages
BKSW-1003
Message
<timestamp>, [BKSW-1003], <sequence-number>,, WARNING, <system-name>, kSWD:
<warning message>.
Probable Cause
Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. This message is used to
convey information regarding the state of the system. Refer to the string at the end of the error
message for specific information. The switch will reboot (on single-CP switches) or fail over (on
dual-CP switches).
The warning message will be one of the following:
•
<Detected unexpected termination of: <daemon name>>
Probable Cause: One of the critical daemons ended unexpectedly.
•
<<daemon name> failed to refresh SWD*** Sending SIGABRT to PID <process id number>>
Probable Cause: One of the critical daemons is found to be nonresponsive; sending signal
abort.
Recommended
Action
Run the supportSave command to determine if any core files were created. If a core file is found,
run supportFtp to send all the core files to a secure server location.
Copy the error message and any core file information, and contact your switch service provider.
Severity
WARNING